FourMatic 2000

FOURMATIC 2000

FourMatic 2000

The FourMatic 2000 is a specialized plate roll. It is made to roll thin gage steel, stainless steel and aluminum to small diameters ina serial production environment. It is easy to operate and when it is integrated with a blank loading cell plus automatic ejection,the system becomes a self sufficient manufacturing cell.

The FourMatic 2000 design cleverly combines the functionality of a simplified design with the affordability of the machine to obtain the performance of a standard large plate roll. The latter being larger and intended for a range of heavier stock rolling, would not be as fast as the FourMatic 2000.

Four-Matic 2000 Hydraulic version (Models FMH)

Four-Matic 2000 Pneumatic version (Models FMP)

Machine Standard Features

Frame built of laser cut high strength steel, welded, stress relieved and sand blasted

All UL listed GE electrical components or equivalent installed in a UL listed NEMA 12 equivalent electrical cabinet with master breaker

Hydraulic unit by Rexroth and valves by Aron

Hydraulic pinching and drop-end for Hydraulic version (FMH series)

Pneumatic pinching and drop-end for Pneumatic version (FMP series)

Full automatic cycle for high production

Powered bending rolls movement by self breaking motor

Rolls are hardened HRC 54 - 56, ground and assembled on bearings

Control console on pendant attached to machine frame

Two sequential axes programming installation

Safety devices and service book according to CE Norms

Optional Features and Equipment

Automatic ejection of the bent piece by means of rod-less pneumatic cylinder

Stacked blanks automatic feeding system integrated within the machine controls system

Blank feed-in alignment system

Four Matic 2000 - Brake motor drive powering rolls movement and automatic rodless cylinder part ejector

Rolls' bridge fulcrumed / swinging about the pinching roll axis

A fully automated and integrated system of blank feeding unit and the Four-Matic 2000

RATED AT 50,000 PSI or 350N/mm2 MATERIAL YIELD STRENGTH
AND ROLLING AT FULL USEFUL LENGTH @ Cylinder Diameter Rolled
	ROLL	ROLLING		CYLINDER		DIMENSIONS & WEIGHT
MODEL	LENGTH	CAPACITY	ROLLS Øs	Ø ROLLED	LENGTH	WIDTH	HEIGHT	WEIGHT	POWER

FMP/60/05 & FMH/60/05	500mm	1,0mm	60mm	75mm	1600mm	750mm	1000mm	405Kg	0,75Kw
	19.685"	20ga	2.362"	2.953"	63"	30"	39"	895 lbs	1HP
FMP/60/10 & FMH/60/10	1000mm	0,6mm	60mm	75mm	2100mm	750mm	1000mm	490Kg	0,75Kw
	39.370"	24ga	2.362"	2.953"	83"	30"	39"	1080 lbs	1HP
FMP/60/13 & FMH/60/13	1300mm	0,5mm	60mm	75mm	2400mm	750mm	1000mm	530Kg	0,75Kw
	51.181"	25ga	2.362"	2.953"	95"	30"	39"	1170 lbs	1HP

FMP/70/05 & FMH/70/05	500mm	1,2mm	70mm	90mm	1600mm	750mm	1000mm	425Kg	0,75Kw
	19.685"	18ga	2.756"	3.543"	63"	30"	39"	940 lbs	1HP
FMP/70/10 & FMH/70/10	1000mm	0,7mm	70mm	90mm	2100mm	750mm	1000mm	515Kg	0,75Kw
	39.370"	23ga	2.756"	3.543"	83"	30"	39"	1135 lbs	1HP
FMP/70/13 & FMH/70/13	1300mm	0,6mm	70mm	90mm	2400mm	750mm	1000mm	550Kg	0,75Kw
	51.181"	24ga	2.756"	3.543"	95"	30"	39"	1215 lbs	1HP

FMP/80/05 & FMH/80/05	500mm	1,5mm	80mm	95mm	1600mm	750mm	1000mm	440Kg	0,75Kw
	19.685"	16ga	3.150"	3.740"	63"	30"	39"	970 lbs	1HP
FMP/80/10 & FMH/80/10	1000mm	1,0mm	80mm	95mm	2100mm	750mm	1000mm	535Kg	0,75Kw
	39.370"	20ga	3.150"	3.740"	83"	30"	39"	1180 lbs	1HP
FMP/80/13 & FMH/80/13	1300mm	0,8mm	80mm	95mm	2400mm	750mm	1000mm	565Kg	0,75Kw
	51.181"	22ga	3.150"	3.740"	95"	30"	39"	1245 lbs	1HP

FMP/95/05 & FMH/95/05	500mm	2,0mm	95mm	125mm	1600mm	750mm	1000mm	470Kg	1,1Kw
	19.685"	14ga	3.740"	4.921"	63"	30"	39"	1040 lbs	1.5HP
FMP/95/10 & FMH/95/10	1000mm	1,5mm	95mm	125mm	2100mm	750mm	1000mm	565Kg	1,1Kw
	39.370"	16ga	3.740"	4.921"	83"	30"	39"	1245 lbs	1.5HP
FMP/95/13 & FMH/95/13	1300mm	1,0mm	95mm	125mm	2400mm	750mm	1000mm	600Kg	1,1Kw
	51.181"	20ga	3.740"	4.921"	95"	30"	39"	1325 lbs	1.5HP

FMP/105/05 & FMH/105/05	500mm	2,5mm	105mm	135mm	1600mm	800mm	1020mm	530Kg	1,1Kw
	19.685"	12ga	4.134"	5.315"	63"	32"	40"	1170 lbs	1.5HP
FMP/105/10 & FMH/105/10	1000mm	2,0mm	105mm	135mm	2100mm	800mm	1020mm	635Kg	1,1Kw
	39.370"	14ga	4.134"	5.315"	83"	32"	40"	1400 lbs	1.5HP
FMP/105/13 & FMH/105/13	1300mm	1,5mm	105mm	135mm	2400mm	800mm	1020mm	710Kg	1,1Kw
	51.181"	16ga	4.134"	5.315"	95"	32"	40"	1565 lbs	1.5HP

RATED AT 36,000 PSI or 250N/mm2 MATERIAL YIELD STRENGTH
AND ROLLING AT FULL USEFUL LENGTH @ Cylinder Diameter Rolled
	ROLL	ROLLING		CYLINDER		DIMENSIONS & WEIGHT
MODEL	LENGTH	CAPACITY	ROLLS Øs	Ø ROLLED	LENGTH	WIDTH	HEIGHT	WEIGHT	POWER

FMP/60/05 & FMH/60/05	500mm	1,2mm	60mm	75mm	1600mm	750mm	1000mm	405Kg	0,75Kw
	19.685"	18ga	2.362"	2.953"	63"	30"	39"	895 lbs	1HP
FMP/60/10 & FMH/60/10	1000mm	0,7mm	60mm	75mm	2100mm	750mm	1000mm	490Kg	0,75Kw
	39.370"	22ga	2.362"	2.953"	83"	30"	39"	1080 lbs	1HP
FMP/60/13 & FMH/60/13	1300mm	0,6mm	60mm	75mm	2400mm	750mm	1000mm	530Kg	0,75Kw
	51.181"	24ga	2.362"	2.953"	95"	30"	39"	1170 lbs	1HP

FMP/70/05 & FMH/70/05	500mm	1,4mm	70mm	90mm	1600mm	750mm	1000mm	425Kg	0,75Kw
	19.685"	16ga	2.756"	3.543"	63"	30"	39"	940 lbs	1HP
FMP/70/10 & FMH/70/10	1000mm	0,8mm	70mm	90mm	2100mm	750mm	1000mm	515Kg	0,75Kw
	39.370"	21ga	2.756"	3.543"	83"	30"	39"	1135 lbs	1HP
FMP/70/13 & FMH/70/13	1300mm	0,7mm	70mm	90mm	2400mm	750mm	1000mm	550Kg	0,75Kw
	51.181"	22ga	2.756"	3.543"	95"	30"	39"	1215 lbs	1HP

FMP/80/05 & FMH/80/05	500mm	1,8mm	80mm	95mm	1600mm	750mm	1000mm	440Kg	0,75Kw
	19.685"	14ga	3.150"	3.740"	63"	30"	39"	970 lbs	1HP
FMP/80/10 & FMH/80/10	1000mm	1,2mm	80mm	95mm	2100mm	750mm	1000mm	535Kg	0,75Kw
	39.370"	18ga	3.150"	3.740"	83"	30"	39"	1180 lbs	1HP
FMP/80/13 & FMH/80/13	1300mm	0,9mm	80mm	95mm	2400mm	750mm	1000mm	565Kg	0,75Kw
	51.181"	20ga	3.150"	3.740"	95"	30"	39"	1245 lbs	1HP

FMP/95/05 & FMH/95/05	500mm	2,4mm	95mm	125mm	1600mm	750mm	1000mm	470Kg	1,1Kw
	19.685"	12ga	3.740"	4.921"	63"	30"	39"	1040 lbs	1.5HP
FMP/95/10 & FMH/95/10	1000mm	1,8mm	95mm	125mm	2100mm	750mm	1000mm	565Kg	1,1Kw
	39.370"	14ga	3.740"	4.921"	83"	30"	39"	1245 lbs	1.5HP
FMP/95/13 & FMH/95/13	1300mm	1,2mm	95mm	125mm	2400mm	750mm	1000mm	600Kg	1,1Kw
	51.181"	18ga	3.740"	4.921"	95"	30"	39"	1325 lbs	1.5HP

FMP/105/05 & FMH/105/05	500mm	3,0mm	105mm	135mm	1600mm	800mm	1020mm	530Kg	1,1Kw
	19.685"	11ga	4.134"	5.315"	63"	32"	40"	1170 lbs	1.5HP
FMP/105/10 & FMH/105/10	1000mm	2,4mm	105mm	135mm	2100mm	800mm	1020mm	635Kg	1,1Kw
	39.370"	12ga	4.134"	5.315"	83"	32"	40"	1400 lbs	1.5HP
FMP/105/13 & FMH/105/13	1300mm	1,8mm	105mm	135mm	2400mm	800mm	1020mm	710Kg	1,1Kw
	51.181"	14ga	4.134"	5.315"	95"	32"	40"	1565 lbs	1.5HP